|
889 Generator Protection System
- Primary or backup protection for generators
- Suitable for combined generator and in-zone transformer differential protection
- Support for a wide range of communications protocols, network architectures, and time synchronization, including Modbus, DNP 3.0, IEC 61850 Edition 2, and IEEE 1588 Time Sync
|
|
G60 Generator Protection System
- Comprehensive protection for AC generators.
- Suited to any size of generator driven by
steam, gas, hydraulic or other turbines.
- Large color graphical HMI and high density I/O option available.
|
|
G30 Generator Protection System
-
Cost effective protection of small to medium
sized generators
-
Suited to combined generator and
transformer protection.
- Large color graphical HMI and high density I/O option available.
|
|
P343 Medium to Large Sized Generator Management IED
- Advanced generator management relay for medium/large generators
- Comprehensive generator and transformer protection and condition monitoring
- Support for a wide range of communication options including MODBUS, IEC60870-5-103, DNP 3.0 and IEC61850
|
|
P341 Interconnection Protection Relay
- Comprehensive protection for interconnecting distributed resources with the electric power system
- Provides Dynamic Line Rating (DLR) for transmission line capacity optimization
- The P341 is under last-time buy. Orders may be placed until 1st December 2024
and will be fulfilled based upon availability. As an alternative, please refer to
P14DG
or P143
or 850D.
|
|
GPM-F Field Ground Protection Module
- Providing advanced field ground fault protection
for generator applications
- Continuously monitors and protects the generator
during stopped, starting and running conditions for
increased asset life
|
|
P345 Large Generator Management Relay with Stator Earth Fault
- Advanced generator management relay with low frequency injection 100% stator earth fault for large generators
- Comprehensive generator and transformer protection and condition monitoring
- Support for a wide range of communication options including MODBUS, IEC60870-5-103, DNP 3.0 and IEC61850
|
|
P14DG Distributed Generator Interconnection Relay
- Directional Feeder Management relay for small generator protection
- Available in either a 30TE or 40TE cases
- TCS and Ethernet communications available together in 40TE case
- Check sync and voltage restrained overcurrent protection and power function included
|
|
GPM-S Stator Ground Protection Module
- Sub-harmonic injection based stator ground
protection provides early detection of ground
fault conditions
- Detect ground faults through 100% of the
stator winding including neutral point
|
|
489 to 889 Generator Protection System
- Fast, 3-step solution to upgrade previously installed SR 489 relays to the advanced Multilin 889
- Eliminates the need for modifications to switchgear cut-outs, re-wiring, and new drawings or re-engineering
|
|
P391 Rotor Earth Fault Module
- Detects rotor earth fault faults in the field winding of the generator.
- Requires the P34x relay to have the current loop CLIO hardware option fitted.
- Used with P342, P343, P344, P345 and P346 Generator protection relays
|
|
DGPR Retrofit Solution
- Fully integrated retrofit solution of GE's legacy Multilin DGP Generator Protection Relay
- Suited for large hydro, gas and steam turbine generators
|